Digitus DN-13020 Manual de usuario

DN-13007 2 USB 2.0 Hi-Speed Ports/MFP Server User`s Manual Version 1.17 1

4. Double click the highlight list and type the server’s administrator (default: admin) and password (default: admin). 5. After you login su

6. Click the button that corresponds to your choice of IP setting method (static or dynamic using DHCP). When assigning a static IP address you a

3. Go to the web page and click CONFIG icon. 4. Login your administrator (default: admin) and password (default: admin). 5. Click TCP/IP i

or dynamic using DHCP). When assigning a static IP address you also have to define Subnet Mask and Default Gateway. 7. Click Submit to save your s

5. Set your printer names in Printer Name box and then click Apply. B. Using Server’s Web Pages 1. Go to the web page and click CONFIG icon. 2

4. Set your printer names in Printer Name box and then click Apply. 3.3.2 Storage Names The local drives of the two storages in USB1 port and USB2

Chapter4 Adding Printers in Windows 4.1 Overview of Installation Methods This chapter describes how to add network printers to Windows PC. Tabl

4.2.1 The Server and Windows PC on Same LAN LAN HUB/Switch MFP Server PC PC USB Printer 4.2.2 The Server and Windows PC on Different LANs Examp

1. Click Start, click Control Panel, click Printers and Other Hardware, and then click Printers and Faxes. 2. Double click Add Printer to start th

5. In the Printer Name or IP Address box, type Host Name of the MFP server (default: DN-13007) or IP address of MFP server. In the Port Name box,

Table of Contents CHAPTER1 INTRODUCTION ...4

Address box. 6. Click Next. 7. Click Custom/settings. 8. Click Settings and confirm that the settings are as below. The queue names are USB

9. Click Finish 21

4.4.2 Using Control Center for LPR Printing Windows Platform: Windows 2000, XP and 2003 1. Start MFP Server Control Center, select your MFP serv

4. Select the desired printer driver and click Set Port to Printer. 5. If you can not find any printer driver in Printer List, please install y

9. Click Finish. 24

4.4.4 Using Control Center for Raw TCP/JetDirect Printing Windows Platform: Windows 2000, XP and 2003 1. Start MFP Server Control Center, select

4. Select the desired printer driver and click Set Port to Printer. 5. If you can not find any printer driver in Printer List, please install

5. In the Port Name box, type the path to the printer in the following format: ”\\ server’s Host Name\printer name” or ”\\ server’s IP address\pr

2. Select USB1 Port or USB2 Port to add the printer in Add the printer box, choose to use Host Name or IP address to represent MFP server in Sele

5. If you can not find any printer driver in Printer List, please install your printer driver first or click Add New Printer to install the print

5.1 Configuring Host File...32 5.2 Printing by LPD/LPR ...

4. Click the Next button. On the next window, select Connect to a printer on the Internet or on a home or office network. In the URL: field, ente

5. Click Next and then continue Windows Add Printer Wizard. 31

Chapter5 Adding Printers in Unix/Linux This chapter describes how to add network printers to Unix/Linux PC. 5.1 Configuring Host File If us

:lp=:rm=DN-13007:rp=USB1_LQ:\ ---(B) :sd=/var/spool/lpd/Printer1:\ ---(C) :lf=/var/spool/lpd/Printer1/Printer1_errs: ---(D) where (A) Describes t

2. Click on the New button in the Printer configuration window. 3. Click on the Forward button in the Add a new print queue window. 34

4. Fill in your desired printer name and description (optional) in Queue name window and then click on the Forward button. 5. In Queue type wind

B. Networked JetDirect: Fill in MFP server’s IP address and protocol’s TCP port and then click the Forward button. Example: If your MFP server’s

ii. Fill in the Workgroup, Host Name, User name and Password in Authentication window and then click on the OK button. iii. Click on the Forward

D. Networked CUPS (IPP): Fill in MFP server’s IP address and printer name then click the Forward button. Example: If your MFP server’s IP address

8. Click Finish button. 39

Chapter1 Introduction Thank you for purchasing this Digitus DN-13007 USB MFP Server (in the following referred to as “Server”). This server is d

Chapter6 File Server Function This chapter describes the file server function of Digitus DN-13007 MFP server which allows USB storage devices to

6.4 Supported Codepages - What is codepage? Used by the system to encode and interpret string characters. Codepage formats are not the same for

5. Select your codepage form File Server Codepage box and click Apply. B. Using Server’s Web Pages 1. Go to the web page, click CONFIG 2.

4. Select your codepage form File Server Codepage box and click Apply. 6.5 Adding Your USB Mass Storages to Network with Security You can use

5. Set up File Server Configuration: A. Set SMB/CIFS Print/File Server  Enable SMB/CIFS Print/File Server: select the item, if you want to s

number.  Enable Passive Mode: select the item, if you want to allow that your FTP server can accept passive mode command.  Enable Server Authen

 Enable SMB/CIFS Print/File Server: select the item, if you want to support SMB/CIFS print/File server.  Enable Internet Access: clear the item

as the default Host Name "DN-13007" or the Host Name that you have set. 6. If you can not find Workgroup name of MFP server in Microso

1. Type Dos command as “ftp” 2. Type “open server’s Host Name” or “open server’s IP address”. If you have changed the default FTP port : 21 to t

file system. All data in the disk will be destroyed. Just choose FAT or FAT32 file system, then click “format” button to begin formatting the disk.

2.3 Physical Description 2.3.1 Ethernet Connector The network connector of this Server is designed for 10 Mbps or 100 Mbps Ethernet networks and

Chapter7 Scan Server Function This chapter explains how to use the scan server function of this product. The scan server function enables a USB

3. Set the options. The options are defined as follows: - Source: choose flatbed scanning or scrolledbed scanning - Mode: choose lineart (blac

7.2.2 Using Windows Applications Prior to using scanning functions in Windows applications such as MS Word, Photoshop …etc, you have to install net

5. Click Preview button. 6. Adjust the window size to be scanned. 7. Click Scan button. 7.3 Using the Shared Scanner in Linux 7.3.1 Using X

54

Chapter8 Control Center This chapter describes how to use MFP Server Control Center in your Windows. 8.1 Installing Control Center 1. Cli

 Network Scanning : perform network scanner function of the highlight list’s server  Add Printer : perform add printer function of the highlight

5 Enable SMB/CIFS Print/File Server: select or clear Enable SMB/CIFS Print/File Server support. It is enabled in Factory Default. - Enable Interne

 User Accounts: You can change administrator name and password or add a user account for SMB/CIFS Print/File server and FTP File server. If you

 SNMP: You can set community and some parameters for SNMP server. Furthermore, you can enable SNMP v3 for more security.  Set SNMP Configurat

2.4 Installation Methods 2.4.1 Installation and Integration Please refer to the table below to select the appropriate installation method. The

 Email: If you want to receive some alerting mail from the server, you have to enable SMTP Protocol, and set Email configuration. You can set ne

 Maintenance: If you want to restart server, restore factory default values of the server, download new firmware file from product’s public webs

62

Chapter9 Server’s Web Pages 9.1 Introduction The Server runs the daemon of http server, httpd on TCP port: 80. Users may use the web pages

9.2.2 Set up Server Configuration To set up the server configuration, the system will request user to enter administrator (default: admin) and pas

access your SMB/CIFS server via Internet. If you select the item, you allow Internet users can access your storage using the SMB/CIFS protocol. - E

 User Accounts: You can change administrator name and password or add a user account for SMB/CIFS Print/File server and FTP File server. If you

5 Delete: delete the existing user account.  SNMP: You can set community and some parameters for SNMP server. Furthermore, you can enable SNMP

 Restart Server: click the button, the server will be restarted.  Maintenance If you want to restore factory default values of the server a

5 Format Disk: You can format the inserted USB disk or USB flash disk to FAT16 or FAT32 file system. All data in the disk will be destroyed. Just

2. Flexibility: The MFP server supports print/File/Scan sharing in all major computer systems and environments. 3. Easy to Install: The MFP se

Chapter10 Email Alerting This Server emails a notification to the user at these events: 1. Adding or Removing a USB device. 2. System Error.

Chapter12 Troubleshooting This chapter provides useful information to help you resolve difficulties you may experience with your Server. Fault s

Chapter13 Restore Factory Defaults You may restore the Server’s default parameters by one of the following methods. 13.1 Using Server’s Web P

13.2 Using Control Center 1. Start Control Center and Auto-searching MFP server window will appear. 2. If the tool finds MFP servers in your l

 Enable Raw TCP Printing/JetDirect - TCP Port (USB1): 9100 - TCP Port (USB2): 9101  SMB/CIFS Print/File Server: enabled - Internet Access:

Chapter14 Upgrade New Firmware This chapter describes how to upgrade your new firmware. You can use the following Procedures to upgrade new firm

Procedure B: Using Server’s Web Pages 1. Power on Digitus DN-13007. Suppose Digitus DN-13007 is in DHCP mode. 2. Check Digitus DN-13007's I

9. Click Browse button to choose the file of new Digitus DN-13007 firmware. 10. Click Upload button to start firmware upgrade. 11. Wait about 1

4. Click Upload Image. 5. Wait for “Image Uploading” to finish and then click Close. 6. Plug-off power adapter and then plug-in the power adap

Chapter15 Init Button The Init button is used for maintenance: Simultaneously press Init button and turn on (by plugging in the power adaptor)

Chapter3 Basic Installation 3.1 Connecting the Hardware 1. Make sure that your USB devices are switched off and that the MFP server’s Power

following methods, depending on your network operating environment:  Automatic IP Address Assignment  Manual IP Address Assignment 3.2.5