Digitus DN-16054-1 Guía de instalación descargar pdf (Pagina 6)

3. ETHERNET CONNECTION

Before using this network camera, please follow the instructions below to finish the network

connection settings based on your installation environment:

 To configure the network settings, you must connect the camera to your PC by LAN.

For details, please refer to “3.1 Network Connection via LAN” at page 6.

 To configure the network settings via Wizard, please refer to

“3.2 Network Configurations via Wizard” at page 10.

 To configure the network settings via our supplied CMS software, Video Viewer,

please refer to “3.3 Network Configurations via Video Viewer” at page 14.

3.1 Network Connection via LAN

Step1: Connect this network camera and your PC via a RJ45 network cable, and make sure

the camera is powered on.

Step2: Set the PC’s IP address as “192.168.1.XXX” (1~255, except 10).

For Windows 2000 users:

a) Select “Start”  “Settings”  “Network and Dial-up Connections”.

b) Right-click on “Local Area Connection”, and select “Properties”.

c) In the “General” tab, select “Internet Protocol (TCP/IP)”, and select “Properties”.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Sin comentarios

Digitus DN-16054-1 Guía de instalación Pagina 6